Skip to main content
Oilfield · Cementing Additives

Cementing additives.
Fluid loss, retarders, accelerators.

Proprietary additives for primary, squeeze, and remedial cementing operations. Each code is matched to a bottom-hole circulating temperature window and supplied with a lot-traceable Certificate of Analysis. TDS downloadable directly on every product below, no email gate.

8
Products listed

Click any product to download the Technical Data Sheet directly, or open the detail page for full composition, application guidance, and compatible additives.

CFL-115
Fluid Loss Agent
Powder · < 180°F BHCT

Fluid Loss Agent | Low Temperature

CFL-115 is a fluid loss control additive designed for use in oil-well cement slurries at bottom-hole circulating temperatures below 180°F. Reduces filtrate loss to maintain slurry properties through circulation and placement.

Where used: Primary cementing operations at moderate temperatures. Effective in fresh-water and brine slurry systems.

Pairs with:
DCR-270 · CAC-97 · CSB-100
CFL-160
Fluid Loss & Retarder
Powder · < 200°F BHCT

Fluid Loss Agent & Retarder | Medium Temperature

CFL-160 is a dual-action fluid loss and set retarder additive for oil-well cement slurries at bottom-hole circulating temperatures below 200°F. The combined functionality reduces required additive count and simplifies slurry design for moderate-temperature jobs.

Where used: Primary cementing where both fluid loss control and retardation are needed. Common in 5,000–10,000 ft applications.

Load rate:
0.2 to 0.8% BWOC
Pairs with:
CAC-97 · DCAF-34L · CSB-100
CFL-160L
Fluid Loss & Retarder
Liquid · < 200°F BHCT

CFL-160 | Liquid Form

Liquid form of CFL-160, same fluid-loss and retarder profile in a liquid blend for ease-of-handling on location.

Where used: Same as CFL-160, selected when liquid additive handling is operationally preferred.

Pairs with:
CFL-160 · CAC-97
CFL-175
Fluid Loss Agent
Powder · < 250°F BHCT

Fluid Loss Agent | High Temperature

CFL-175 is a high-temperature fluid loss control additive for cement slurries operating up to 250°F bottom-hole circulating temperature.

Where used: Deeper-well primary cementing operations. Effective in salt-saturated systems.

Pairs with:
DCR-270 · CR-350 · DMF-100
DCR-270
Cement Retarder
Powder · 200°F – 320°F BHCT

Lignosulfonate Cement Retarder

DCR-270 is a lignosulfonate-based set retarder for oil-well cement slurries in the 200°F to 320°F temperature range. Provides predictable thickening times with low effect on compressive strength development.

Where used: Primary cementing and squeeze cementing in moderate-to-high temperature wells.

Pairs with:
CFL-160 · CFL-175 · CSB-100
CR-350
Cement Retarder
Powder · > 300°F BHCT

Non-Lignosulfonate Retarder | High Temp

CR-350 is a non-lignosulfonate cement retarder for very high temperature applications above 300°F. Maintains predictable thickening control where lignosulfonate retarders begin to lose effectiveness.

Where used: Deep, hot wells. Geothermal cementing applications.

Pairs with:
CFL-175 · DMF-100
CAC-97
Accelerator
Powder

Calcium Chloride Set Accelerator

CAC-97 is a calcium chloride-based set accelerator for cement slurries used to reduce thickening time and accelerate compressive strength development in surface and shallow-set casing operations.

Where used: Surface cementing, top jobs, and any application requiring rapid set development.

Pairs with:
CFL-115 · CFL-160
GASCON
Gas Migration Control
Powder

Gas Migration Control Polymer Blend

GASCON is a polymer and microfine materials blend designed to control gas migration through transitioning cement slurries. Used in primary cementing applications where annular gas flow is a concern.

Where used: Primary cementing in gas-producing zones to prevent annular gas migration during cement set.

Pairs with:
GMA-614 · GMA-434 · CGC-D
Request a Quote

Quote on any cementing additive in the line.

  • ▸Producer-confirmed pricing, MOQ, lead time
  • ▸COA, TDS, and SDS documentation included
  • ▸Real people answer, not a routing bot

By submitting you agree to Xanero USA contacting you about this inquiry. We never sell your data.

Sourcing cementing chemistry?

Bulk pricing on the full cementing additive line.

TDS downloadable above. Producer-confirmed quote within one business day, US-domiciled invoicing, lot-traceable COA on every shipment.